Arlon Mox-Tape SA and SB

MOX-Tape 600-T Series® Tape is produced in the form of a triangular cross section with a colored guide line running along the peak of the triangle. The guideline facilitates winding of the tape so minimum overlapping is obtained while maximum physical and electrical properties are retained. The tape is interleaved with a quick release film. It is self-bonding and self-fusing. After curing at room temperature for 24 hours, the tape forms an inseparable silicone layer that must be cut for removal.

Dielectric Strength	Before Stretching
	602-1 450 VPM Minimum
	603-1 350 VPM Minimum
	604-1, 604-1 ½ 300 VPM Minimum
	605-1, 605-1 ½ 275 VPM Minimum
	606-1 ½ 250 VPM Minimum
	607-1 ½ 225 VPM Minimum

Hardness	Shore “A” (ASTM D2240)	50 +/- 10

Tensile Strength	(ASTM D412)	700 PSI Minimum

Elongation	At break (ASTM D412)	350% Minimum

Temperature Range	-65° to +500° F

Resistivity	Volume Resistivity (ASTM D991)	1013 ohm/cm. Minimum

Adhesion	Tackiness (ASTM D2148) 2 P.P.I.

Military Specification	MIL-I-46852C TYPE II
	(now replaced by CID A-A-59163 C11 TY II)