|
• Highly elastic and very tough.
• Abrasion resistant.
• Repositionable.
• High and low-temperature applications.
• Extra thickness for stay flat and dimensional stability.
• Conformable and long lasting.
• Transparent for visual inspection.
• Easy to apply – just press in place.
• Excellent for die-cutting.
| TEST DATA |
Test |
Typical Value |
Typical Value (Metric) |
Test Method |
| Total Thickness |
9 mils |
229 Microns |
PSTC-33 |
| Substrate Thickness |
7 mils |
178 Microns |
PSTC-33 |
| Adhesion to Steel |
40 oz/in. |
0.438 N/mm |
ASTM - D3330 |
| Tensile Strength |
60 lb/in. |
10.508 N/mm
|
ASTM D-3759 |
| Elongation (%) |
500 % |
|
|
| Application Temperature Range |
-65°F to 300°F |
10°C to 49°C |
|
| Operating Temperature Range |
50°F to 120°F |
-40°C to 93°C |
|
- Single-Coated with Liner Construction
- Backing: Interior-Grade Aromatic Ployurethane
- Adhesive: Urethane-based
- Liner: 91# Coated Kraft Paper
- Colors: Transparent
- Backing: Polyvinyl Chloride
Adhesive:
- Acrylic
Liner: #53
- Coated Kraft Paper
- Colors: Black
** Recommended storage conditions: 40-60% Humidity, 60°F-80°F
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry's knowledge it is true and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are submitted only for the user's information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility
|
