• High tensile strength.
• Provides a heat bonding adhesive - after application of heat, tape adhesion increases up to four times.
• Government specification FAR Part 25. Section 853.
| Technical Data |
| Backing material |
Glass Cloth |
| Adhesivel |
Rubber/resin, flame retardant |
| Color |
Natural
|
| Total tape thickness |
7.5 mils / 0.191 mm |
| Tensile strength |
170 lbs. per in. / 35.7 kg per cm |
| Adhesion to steel |
65 oz. per in. / 725 gm per cm |
| Unwind @ 150 FPM |
20 oz. per in. / 223 gm per cm |
| Gov’t specification |
FAR Part 25, Section 853 |
| |
|
|
| For application |
40º F to 150ºF |
| After application |
-35º F to 225ºF |
| Approval for listing |
International Association of Plumbing and Mechanical Officials' Directory |
| |
|
|
|
| Note: The above are typical values and should not be used in writing specifications |
** Recommended storage conditions: 40-60% Humidity, 60°F - 80°F
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038)
by qualified technical personnel. To Berry's knowledge it is true and accurate. However, the information and recommendations
are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently
determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state and
local laws and regulations. The data are submitted only for the user's information and consideration, and do not constitute
a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility
|
