|
• Qualified to Boeing BMS 5-146 for cargo liner tape applications.
• Bright white glass cloth backing blends well with Tedlar (PVF) cargo liner panels.
• Glass cloth backing is conformable over contoured surfaces like mechanical fasteners as well as abrasion resistant.
• Acrylic adhesive bonds well to both new and worn Tedlar (PVF) cargo liner panels.
• Passes 25.853 and 25.855 burn tests.
• Passes smoke and toxic gas emission requirements of ABD 0031, para 7.3.2 and para 7.4.
• Available printed with FAR 25.853, 25.855 and ABD 0031 specification designations and paper interliner.
• P-626 available in skip-slit version (P-626SL) for ease of application.
| Technical Data |
| Backing material |
Glass cloth |
| Adhesivel |
Modified acrylic, flame retardant |
| Color |
White |
| Total thickness |
6.8 mils typical |
| Elongation |
5% typical |
| Total weight without liner |
6.8 oz/sq. yd. |
| Tensile |
90 lbs per inch minimum |
| Adhesion to steel |
32 oz. per inch minimum |
| Adhesion to PVF |
32 oz. per inch minimum |
| Note: The above are typical values and should not be used in writing specifications |
** Recommended storage conditions: 40-60% Humidity, 60°F - 80°F
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry's knowledge it is true and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are submitted only for the user's information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which
BERRY PLASTICS assumes any legal responsibility
|
